Joan of Arc Bronze Statue Catholic Saint

Image 0 of Joan of Arc Bronze Statue Catholic Saint

Joan of Arc Bronze Statue Catholic Saint


Joan of Arc
Bronze / Marble Base
21 Pounds

Have a question?

Stunting Quality Bronze Casting

 Interpretation In Bronze  
"Jeanne d'Arc"

Joan of Arc
France c1875

Etienne-Henri Dumaige

We make a beautiful interpretation of Joan of Arc modeled from the original by Etienne-Henri Dumaige. This is not a mass produced piece from China. If you are new to eBay, know that over 50% of bronze art on eBay is from China and upon further examination, from the same supplier using a multitude of user names. These ads are very tricky and misleading so be careful.  When buying from us, you are dealing with artist that do most of the work at our workshop in Tennessee. We do all of the patina work, suffering over each piece knowing the quality is a reflection on us and for you, an heirloom.  A piece of art should be as special for the maker as the buyer.

19" tall x 8" wide x 6" deep  
21 pound weight  
The marble base is 8" x 7.5" x 1" thick.  

Joan of Arc, born 1412, died 1431 at the young age of 19 years old.  Also known as "the Maid of Orleans," was a 15th century Catholic Saint, and national heroine of France. A peasant girl born in Eastern France, Joan led the French army to several important victories during the Hundred Years" War, claiming divine guidance, and was indirectly responsible for the coronation of King Charles VII . She was captured by the English, tried by an ecclesiastical court and burned at the stake when she was only nineteen years old. Twenty-four years later, the Holy See reviewed the decision of the ecclesiastical court, found her innocent, and declared her a martyr . She was beatified  in 1909 and later canonized in 1920.

Joan of Arc has remained an important figure throughout Western culture. From Napoleon  to the present, French politicians of all leanings have invoked her memory. Major writers and composers who have created works about her include Shakespeare,Voltaire, Schiller, Verdi, Tchaikovsky, Twain, and Shaw. Depictions of her continue in film, television, video games, song, and dance.

 Shipping is immediate upon payment. 

How Is It Made ?
The "Lost Wax" Process

     What gives bronze art value beyond that of a "souvenir" that ends up in a closet? There are many reasons including cost of materials (bronze, silicone for molds, tools, ovens, etc.) The main reason is there are very few people trained in the tedious process practiced by the ancient Greeks and Romans. Bronze sculpture is not easy to make and many time consuming, difficult steps are involved. In a world of hi-tech mass production, bronze casting remains essentially unchanged. Beware of "cold cast" or "bonded bronze", these are misleading names given to plastic figurines. Each of our genuine bronze castings is in reality an "original" and the following explains why. These are the basic steps involved in creating a bronze Sculpture using the classic "cire perdue" (lost wax) process:

artist's original model
silicone mold of the model
create lost wax mold
bronze casting
clean mold from casting
grind, rasp and file bronze
assemble pieces by welding
file and finish assembled piece
application of patina

All bronze pieces are cast from a wax model regardless of the original material the model was sculpted. A silicone mold is made from the artist's finished piece, and a hollow wax cast is drawn from this mold. The wax is then repaired, re-worked and finished to the sculptor's specifications. Prior to creating a ceramic shell (explained below), vents are attached within the wax model. These vents are necessary in difficult areas where gas may accumulate such as hips, limbs, and neck. The vents allow the gas to escape when the molten bronze is poured and will prevent air pockets from forming and exploding the ceramic shell. The ceramic shell is one of the few materials the can withstand the heat of the molten metal.

When the wax cast is hardened and the vents are in place a ceramic shell is formed over the wax. This shell is made by dipping the wax into a slurry, coating it with sand, drying and repeating the process up to 14 times. A core consisting of plaster, ground brick and water is poured into the interior of the wax mold. After the ceramic shell and core have set, the mold is fired in an oven, the wax is melted and the ceramic shell is left intact. This process is known in French as "cire perdue" (lost wax). Molten bronze is now poured into the cavity left by the melted wax. When the bronze is cooled, the shell is chipped away using a hammer and chisel.

The bronze must now be repaired and finished. This step is called "chasing" and it is a difficult process because the metal is involved. Any imperfection such as air pockets of pits must be brazed with bronze rod, as in welding. All seams and spurs must be removed by grinding, rasping and, finally, sanding. The next step is to chase or hammer the vents from the mold using special tools. The natural bronze has a dull finish. after final finishing, a patina is applied which may be left matte of polished. Chemicals, pigments, heat, safety equipment and a lot of experience are involved. In addition, since bronze comes in a variety of alloys, the patina requires different chemicals and techniques.

800-321-8618 for credit cards or if you have any questions. 



Shipping Cost 
Most of our items have FREE SHIPPING !

Shipping Time
Most orders within 24 hours or the same day ! 

Expedited Requests 

FREE with all orders.

Professional Packaging
We package with great care! UPS has consistently rated us the shipper with the least damage claims in our region !  

Customer Appreciation
Returning customers or if additional item wanted, call for special pricing and Free shipping.

Return Policy
Satisfaction guaranteed with a 30-Day exchange return policy.

Image 0 of Joan of Arc Bronze Statue Catholic Saint